Redialing; Making A Call While Talking On The Other Line - Sony SPP-M932 Manual De Instrucciones

Notes
• If you hear ringer tones during the conversation, another call is coming in on
the other line (see page 16).
• If you hear an error beep when you press (CHANNEL), move closer to the
base phone.
• Do not press (CHANNEL) when you're far from the base phone. The call may
be disconnected.
If the handset battery becomes weak during a call
You hear the beep and the BATT LOW lamp on the handset flashes.
The call will be disconnected soon. Replace the handset on the base
phone to charge.

Redialing

1
Press (LINE 1) or (LINE 2) to select the line.
The corresponding button lights up.
2
Press (REDIAL/PAUSE) to redial the number last dialed.
Notes
• The number last dialed cannot be stored separately for each line. It is the very
last one you have dialed using either line.
• If the number last dialed exceeds 16 digits, only the first 16 digits are dialed.

Making a call while talking on the other line

Example: Making a call on line 2 while talking on line 1
1
Press (HOLD) while talking.
The line 1 is put on hold.
2
Press (LINE 2).
3
Dial a phone number for the second party.
Now you can talk to the second party on line 2.
Tip
Even if you do not press (HOLD) in step 1, the line 1 is put on hold by presseing
(LINE 2).
You can talk with two parties at the same time using both line 1 and
line 2. (Three-way conference, see page 27)
EN
15
Basics