Bosch MSM6S20B Instrucciones De Uso página 10

en Whisk
11. Take out the blade.
12. Empty the container.
■ Clean all parts immediately after use.
X "Cleaning and maintenance" see
page 11
Whisk
For whipping cream, beating egg whites
and milk froth from hot (max. 70 °C)
and cold milk (max. 8 °C) as well as for
preparing sauces and desserts.
W Risk of scalding!
When processing hot liquids, use a tall, thin
receptacle for blending.
Caution!
– Never insert the whisk into the base unit
without the gear attachment.
– Do not attach or remove the gear
attachment with the whisk until the
appliance is at a standstill.
X Fig. C
1. Place the prepared food in the blender
jug or another suitable receptacle or
process in the cooking pot.
2. Place the gear attachment on the whisk
and press until it clicks into position.
3. Place the whisk with the gear
attachment on the base unit and press
until it clicks into position.
4. Plug the mains plug into the mains.
5. Hold the receptacle with one hand and
immerse the whisk.
6. Press the Turbo button Â. The
appliance remains switched on as long
as the button is pressed.
7. Process the food with the whisk.
8. Release the button when the desired
consistency is reached. Wait until the
drive comes to a standstill. Disconnect
the mains plug.
9. Hold down both release buttons
and remove the whisk with the gear
attachment from the base unit.
10. Remove the gear attachment from the
whisk.
■ Clean all parts immediately after use.
X "Cleaning and maintenance" see
page 11
10
"ProPuree" masher
attachment
For processing cooked potatoes and for
making purees from other suitable foods
(e.g. cooked pulses, cooked fruit and
vegetables).
Caution!
– Before using the masher attachment
in a cooking pot, take the pot off the
hotplate.
– Do not bang the masher attachment
against hard edges (pot, bowl).
– Do not process hard ingredients
(e.g. coffee beans, chocolate).
– Only use cooked ingredients.
– Roughly chop large items of food
(e.g. potatoes).
X Fig. D
1. Place the prepared, cooked food in a
suitable receptacle or process in the
cooking pot.
2. Place the gear attachment on the
masher attachment and rotate clockwise
until it clicks into position.
3. Place the masher attachment with the
gear attachment on the base unit and
press until it clicks into position.
4. Plug the mains plug into the mains.
5. Hold the receptacle with one hand and
immerse the masher attachment.
6. Press the Turbo button Â. The
appliance remains switched on as long
as the button is pressed.
7. Move the masher attachment up and
down while processing the food.
8. Release the button when the desired
consistency is reached. Wait until
the drive comes to a standstill.
Disconnect the mains plug.
9. Hold down both release buttons and
remove the masher attachment with the
gear attachment from the base unit.
10. Rotate the gear attachment
anticlockwise and remove from the
masher attachment.
■ Clean all parts immediately after use.
X "Cleaning and maintenance" see
page 11