Sauder Cannery Bridge Serie Instrucciones De Montaje página 21

Step 12
å
Refer to the enlarged diagram to identify the parts on the HINGE.
å
The DOOR may need some adjustments. Follow the text below
to make needed adjustments.
å
DOOR ADJUSTMENTS:
To adjust the DOOR from side to side (horizontal), turn the
adjusting screw in or out.
å
To adjust the DOOR up and down (vertical), loosen both vertical
adjustment screws. Move the DOOR up or down to the desired
location. Tighten the screws after making adjustments.
å
To adjust the DOOR in or out (depth), loosen the mounting screw
one turn and move the DOOR in or out, as needed. Tighten the
mounting screw after making adjustments.
Adjusting screw (horizontal)
429512
Mounting screw (depth)
(vertical adjustment)
www.sauder.com/service
17
Page 21