Sauder Hammond Serie Instrucciones De Montaje página 22

Step 16
1 1
BLACK 1/2" FLAT HEAD SCREW
(12 used in this step)
7
S
2
2
å
Insert two SMALL WOOD DOWELS (7) into the SMALL
DRAWER SIDES (S and T) as shown.
å
Fasten the EXTENSION SLIDES (2) to the SMALL DRAWER
SIDES (S and T). Use six BLACK 1/2" FLAT HEAD SCREWS (27).
Use the exact holes shown in the upper view.
3
T
U
å
Slide the DRAWER BOTTOM (V) into the grooves in the
SMALL DRAWER SIDES (S and T) and SMALL DRAWER
BACK (U).
Page 22
2
27
These
holes must
be here.
Open end
These
holes must
be here.
T
With the palm of
your hand, tap
the DRAWER
BOTTOM down
into the grooves.
V
S
www.sauder.com/service
2 2
BLACK 1-3/8" FLAT HEAD SCREW
U
T
å
Fasten the SMALL DRAWER SIDES (S and T) to
the SMALL DRAWER BACK (U). Use four BLACK 1-3/8"
FLAT HEAD SCREWS (22).
4
S
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
å
Fasten the SMALL DRAWER FRONT (R) to the SMALL
DRAWER SIDES (S and T). Tighten two HIDDEN CAMS.
å
NOTE: Be sure the WOOD DOWELS in the SMALL
DRAWER SIDES insert into the holes in the SMALL
DRAWER FRONT.
å
Fasten a KNOB SET (9) to the SMALL DRAWER
FRONT (R). Use a BLACK 1" MACHINE SCREW (24).
å
Repeat this step for the other small drawer.
22
(8 used in this step)
S
Groove
24
BLACK 1" MACHINE SCREW
(2 used in this step)
1
T
R
9
428246