Sauder Hammond Serie Instrucciones De Montaje página 24

Step 18
1
BLACK 1/2" FLAT HEAD SCREW
(12 used in this step)
2
CC
å
Fasten the EXTENSION SLIDES (2) to the LARGE
DRAWER SIDES (CC and DD). Use six BLACK 1/2"
FLAT HEAD SCREWS (27). Use the exact holes shown
in the upper view.
3
DD
EE
å
Slide the DRAWER BOTTOM (V) into the grooves in the
LARGE DRAWER SIDES (CC and DD) and LARGE
DRAWER BACK (EE).
Page 24
2
27
Open end
2
DD
These
holes
must be
here.
With the palm of
your hand, tap
the DRAWER
BOTTOM down
into the grooves.
V
CC
www.sauder.com/service
2
22
BLACK 1-3/8" FLAT HEAD SCREW
(8 used in this step)
16 used
7
CC
å
Insert eight SMALL WOOD DOWELS (7) into the
LARGE DRAWER SIDES (CC and (DD) and LARGE
DRAWER BACK (EE) as shown.
å
Fasten the LARGE DRAWER SIDES (CC and DD) to
the LARGE DRAWER BACK (EE). Use four BLACK 1-3/8"
FLAT HEAD SCREWS (22).
å
NOTE: Be sure the WOOD DOWELS in the LARGE
DRAWER BACK inserts into the holes in the LARGE
DRAWER SIDES.
4
CC
Be sure the DRAWER
BOTTOM inserts
into the DRAWER
FRONT groove.
å
Fasten the LARGE DRAWER FRONT (BB) to the LARGE
DRAWER SIDES (CC and DD). Tighten four HIDDEN CAMS.
å
NOTE: Be sure the WOOD DOWELS in the LARGE
DRAWER SIDES insert into the holes in the LARGE
DRAWER FRONT.
å
Fasten a KNOB SET (9) to the LARGE DRAWER
FRONT (BB). Use a BLACK 1/2" MACHINE SCREW (29).
å
Repeat this step for the other large drawer.
1
DD
EE
Groove
29
BLACK 1/2" MACHINE SCREW
(2 used in this step)
DD
BB
9
428246