Sauder Manhattan Gate Serie Instrucciones De Montaje página 17

Step 11
å
Insert two LARGE WOOD DOWELS (17) into the SMALL
TOP (F) as shown.
å
Push the RIGHT END (T) onto the WOOD DOWELS in the
SMALL TOP (F).
å
Fasten the ANGLE BRACKET (Z) to the SMALL TOP (F) and
RIGHT END (T). Tighten eight 5/8" HEX HEAD SCREWS (21)
using the L-WRENCH (16).
å
NOTE: You should start each SCREW a few turns before
completely tightening any of them.
T
Z
429257
S u r
Part (G). Another
sturdier, easier,
friendlier component!
21
5/8" HEX HEAD SCREW
(8 used in this step)
F
www.sauder.com/service
Part (H). Another
sturdier, easier,
friendlier component!
T
e s
h o l
i t h
e w
f a c
16
17
F
Edge with holes
Page 17