Sauder Manhattan Gate Serie Instrucciones De Montaje página 14

Step 8
å
Fasten the LEFT CABINET RAIL (2) to the LEFT END (C). Use three 1/2" FLAT HEAD
SCREWS (22) in the exact holes shown.
å
Fasten one EXTENSION RAIL (5) to the LEFT END (C). Use three 3/8" PAN HEAD
SCREWS (23) in the exact holes shown.
å
NOTE: For each EXTENSION RAIL, turn a SCREW into the hole shown in the enlarged
diagram. Then, slide the inner cartridge of the EXTENSION RAIL in to find the other
holes that line up with the holes in the END. Turn a SCREW into these holes.
Roller end
Open end
3/8" PAN HEAD SCREW
(3 used in this step)
Page 14
22
1/2" FLAT HEAD SCREW
(3 used in this step)
2
CL
2
C
Open end
5
23
www.sauder.com/service
5
429257