Sauder Manhattan Gate Serie Instrucciones De Montaje página 6

Hardware Usage Guide
HOW TO USE A HIDDEN CAM & CAM SCREW OR CAM DOWEL
1.
NOTE: Various CAM SCREWS or a CAM DOWEL may be used.
Cam Screws
2.
Arrow
Hidden Cam
3.
Insert the CAM SCREW or CAM DOWEL into the
HIDDEN CAM. Tighten the HIDDEN CAM.
1
2
Page 6
Turn the CAM SCREW or
gently tap the CAM DOWEL
until the shoulder is against
the surface of the part.
Cam Dowel
Push a HIDDEN CAM into
the part. The arrow in the
HIDDEN CAM must point
toward the hole in the
edge of the board.
Hole
www.sauder.com/service 429257