Sauder Manhattan Gate Serie Instrucciones De Montaje página 26

Step 20
å
Fasten the SMALL DRAWER BACK (K) to the SMALL DRAWER
SIDES (W and J). Use four 1-1/2" FLAT HEAD SCREWS (19).
å
NOTE: You should start each SCREW a few turns before completely
tightening any of them.
å
Fasten one DRAWER PULL (S) to the SMALL DRAWER FRONT (H).
Use two 1/2" FLAT HEAD SCREWS (22).
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
Page 26
K
J
www.sauder.com/service
1-1/2" FLAT HEAD SCREW
(4 used for the BACK)
W
H
19
1/2" FLAT HEAD SCREW
(2 used for the PULL)
S
22
429257