Sauder worksense MASON PEAK Serie Instrucciones De Montaje página 12

Step 6 Step
å
Fasten one PULL (191K) to the SMALL DRAWER (B). Use two GRAY 1-3/8" MACHINE SCREWS (39S).
å
Fasten the remaining PULLS (191K) to the DRAWERS (C and D) and DOOR (T). Use eight BLACK 7/8"
MACHINE SCREWS (37S).
å
Remove the SMALL DRAWER (B) from your unit. Push in the black lever on each side of the drawer and pull the
drawer completely out. Refer to the diagram at the bottom of the page.
39S
GRAY 1-3/8" MACHINE SCREW
(2 used for the SMALL DRAWER)
37S
To remove the drawer, push the black lever in
and pull the EXTENSION SLIDE on the drawer
from the EXTENSION RAIL on the PEDESTAL.
Page 12
B
C
D
unit number
191K
BLACK 7/8" MACHINE SCREW
(8 used in this step)
www.sauder.com/commercial-office/service
7
191K
T
37S