Sauder worksense MASON PEAK Serie Instrucciones De Montaje página 15

Step 9 Step
å
With someone's help, carefully turn the TOP (G) over, and hook the angled edges of the BRACES on the TOP into the
BRACES on the back edges of the RIGHT PEDESTAL and LEFT PEDESTAL. Center the TOP on your unit.
å
Fasten the TOP (G) to the front TOP MOLDING (H). Use three BLACK 1-7/8" PAN HEAD SCREWS (16S).
å
NOTE: You should start each SCREW a few turns before completely tightening any of them.
å
Turn the LOCK MECHANISMS on the front edge of the TOP (G) toward each other until they stop moving.
Hook the TOP BRACE into
the PEDESTAL BRACE.
LEFT PEDESTAL
www.sauder.com/commercial-office/service
16S
BLACK 1-7/8" PAN HEAD SCREW
(3 used in this step)
G
H
RIGHT PEDESTAL
The LOCK MECHANISMS will face
each other when locked in place.
unit number
This edge will be snug
against the front BRACE
on each PEDESTAL.
Page 15