Sauder worksense MASON PEAK Serie Instrucciones De Montaje página 16

Step 10 Step
å
To insert the SMALL DRAWER back into your unit, line up the EXTENSION SLIDES on the drawer with the
EXTENSION RAILS on the unit and push the drawer into the unit until the drawer is fully inserted. The drawer will
push in hard until it is all the way in, then it will slide in and out easier.
å
Pull the LARGE DRAWER (D) completely open. If necessary, unlock the LARGE DRAWER with the KEY SET (23J).
å
Push a FILE GLIDE (6B) onto the LARGE LEFT DRAWER SIDE.
å
Slide the FILE RODS (8B) into the FILE GLIDE (6B) on the LARGE LEFT DRAWER SIDE.
å
Slide another FILE GLIDE (6B) onto the other end of the FILE RODS (8B), then press this FILE GLIDE over the
LARGE RIGHT DRAWER SIDE.
Insert the FILE RODS into the holes
of your choice in the FILE GLIDES,
depending on your file sizes.
Page 16
8B
6B
6B
D
unit number
23J
www.sauder.com/commercial-office/service