Publicidad
Description of Functions and
Applications
1. Description function
Crank Case
Retainer
Selector
Jacket
Cover(B)
Crank case
Gear cover
Housing
End cover
2. Applications
• Demolition of concrete
• Ramming, grooving, cutting, detaching, angle forming,
grooving on pebble road
[Examples of application]
Cooling/heating constructions, piping/wiring works,
sanitary equipment installations, installation of
machineries, water supply/sewage works, interior
works, port facilities engineering, other engineering,
equipment installation and repair works.
Operating Instructions
1. Mounting / Dismounting the tools
Use SDS-MAX type tools for CH 5-SE.
In order for prolonged life of the tool, use the tool as
shown below after applying grease.
CH 5-SE
To mount the tool, push the tool in while pushing the
retainer backward in the direction of the arrow. To dis-
mount, pull out the tool while pushing the retainer again
backward in the direction of the arrow.
Mounting the tool
Crank Case
Grease Cover
Cover(A)
Grease
Dismounting the tool
Retainer
2. Mounting the Jacket
The Jacket of CH 5-SE Hammers can be mounted
by turning it 180°. Mount it the way user feels most
comfortable.
Switch
Handle
Always turn off the switch and pull the
power plug off first before mounting or
dismounting the jacket.
3. Mounting / Dismounting the Side Handle
(
Optional)
The side handle of CH 5-SE Hammers can be mounted
in two places. Select the one that is more convenient for
the work purpose and adjust the angle as necessary
(Can be rotated 360°).
4. Operating Method
Place the end of the tool at the position for demolition
and operate the Hammer using its weight. Do not press
too hard. Too much pressure would not increase striking
effect.
Always switch off and pull the power plug off when the
work is finished.
13
Publicidad
