VATECH PaX-i3D Manual De Instrucciones página 43

4 Acquiring CEPH Images
4.2.5
Locking bolt
Nasal positioner
Fixed bolt
Ruler
Notch
CARPUS Plate
42
CARPUS Mode
Attaching the CARPUS plate
Positioning the Patient
1. Match the notch on the CARPUS plate
to the end of nasal positioner.
2. Slide the CARPUS plate onto the
nasal positioner.
3. Slide the locking bolt on the CARPUS
plate towards the nasal positioner and
turn it to secure the CARPUS plate in
place.
4. Ensure that the CARPUS plate is
firmly in place.
1. Ask the patient to put his/her right
hand flat on the CARPUS plate. It is
important to ensure that the patient does
not bend his/her fingers.
2. Have the patient close their eyes and
remain still until scanning is complete.
PaX-i3D (PHT-6500) User Manual