Chin support:
Edentulous
* F o r p a t i e n t s w h o
lack teeth, use the
e d e n t u l o u s c h i n
support.
Temple support wheel
PaX-i3D (PHT-6500) User Manual
Positioning the Patient
Hygiene cover
Bite block
Chin support: Normal
The hygiene cover for the bite block is intended for single
use only. Always replace the hygiene cover for each new
WARNING
patient.
Disinfect the chin support and bite block using an alcohol-
based cleaning solution and wipe away all residue with dry
CAUTION
cloth before each new patient.
4. Guide the patient —facing the chin support — to the equipment.
5. Adjust the height of the column using the column up/down button or switch
(optional) until the patient's chin rests comfortably on the Chinrest.
Ensure that the chin is in contact with the chin support.
5 Acquiring CT Images
1. Insert the normal chin support and bite
block into the chin support receptacle on
the equipment.
2. Place a new hygienic cover over the
bite block.
3. Loosen the temple supports by turning
the Temple Support Wheel at the rear of
the patient support table.
53