VATECH PaX-i3D Manual De Instrucciones página 9

2 Getting started
2 Getting started
2.1
08
Turning on the PaX-i3D
Do not position the patient in the unit while it is initiating.
The patient could be injured if the equipment malfunctions.
WARNING
- Condensation could form inside the equipment if it is
a different temperature than the surrounding room.
Only turn on the equipment once it has reached room
temperature.
- Wait at least 20 seconds after the equipment has been
CAUTION
turned off to turn it back on.
- Allow the equipment to warm up for at least 5 minutes
before acquiring images or preferably more than 30
minutes for image quality.
1. Turn the ON / OFF switch on top of the stationary column to the ON position.
Check whether the LED lamp on top of the equipment is illuminated. If it is
illuminated, the equipment is ready for image acquisition.
License key for Ez3D plus
2. Insert the license key for Ez3D plus
into the USB port on the back of PC.
The license key for Ez3D plus must
be attached to view or analyze the 3D
images.
PaX-i3D (PHT-6500) User Manual
OFF
ON