STEINEL professional Serie Manual Del Usuario página 52

6. Function
The system is put into operation in accordance with the
applicable DALI 2 standard.
– All functions and commands from the DALI standard
IEC 62386 Part 101, Part 103, Part 303 and Part 304
are available.
– All sensor values (motion, light level, temperature and
humidity) can be requested from the DALI-2 Application
Controller.
Automatic or time-based cyclical transmission can also be
selected for motion and light levels. You will find detailed
information in the interface description on the Internet at:
www.steinel.de
The presence detector is intended for connection to a
DALI-2 Application Controller (APC).
LED function
Normal mode: LED OFF
Starting up: LED slowly flashes blue for 10 seconds
Initialisation: LED permanently lights up blue
Identification: The LED flashes blue slowly
Error: The LED flashes red rapidly
Test mode, no movement: LED permanently lights up green
Test mode, movement: LED rapidly flashes green
Note:
The potentiometers on the sensor module have no func-
tionality.
– 52 –
Contents