Franke FMA 97 P XS Manual De Usuario página 7

Please note: Placing food in the oven before the preheating
phase has finished may have an adverse effect on the final
result of cooking.
After cooking and with the function deactivated, the
icon may continue to remain visible on the display
even after the cooling fan has switched off to indicate
that there is residual heat in the compartment�
Please note: The time after which the icon switches off varies
because it depends on a series of factors such as ambient
temperature and function used. In any case, the product
should be considered to be off when the pointer on the
selection knob is at " ".
. PROGRAMMING COOKING
You will need to select a function before you can start
programming cooking�
DURATION
Keep pressing until the
flashing on the display�
Use or to set the cooking time you require, then
press to confirm�
Activate the function by turning the thermostat knob
to the temperature you require: an audible signal will
sound and the display will indicate that cooking is
complete�
Notes: To cancel the cooking time you have set, keep
pressing until the icon starts flashing on the display,
then use to reset the cooking time to "00:00".
This cooking time includes a preheating phase.
PROGRAMMING THE END COOKING TIME/DELAYED
START
After a cooking time has been set, starting the
function can be delayed by programming its end
time: press until the
start flashing on the display�
Use or to set the time you want cooking to end
and press to confirm�
Activate the function by turning the thermostat knob
to the temperature you require: the function will
remain paused until it starts automatically after the
period of time that has been calculated in order for
cooking to finish at the time you have set�
icon and "00:00" start
icon and the current time
Please note: To cancel the setting, switch the oven off by
turning the selection knob to position " ".
END OF COOKING
An audible signal will sound and the display will
indicate that the function has finished�
Turn the selection knob to select a different function
or to position " " to switch the oven off�
Please note: If the timer is active, the display will show "END"
alternately with the remaining time.
. SETTING THE TIMER
This option does not interrupt or program cooking but
allows you to use the display as a timer, either during
while a function is active or when the oven is off�
Keep pressing until the
flashing on the display�
Use or to set the time you require and press
to confirm�
An audible signal will sound once the timer has
finished counting down the selected time�
Notes: To cancel the timer, keep pressing
starts flashing, then use
icon and "00:00" start
until the
to reset the time to "00:00".
EN
icon
7