Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY PRECAUTIONS
• Follow the manufacturer's instructions.
• The installation team must check the correct installation and functioning of the equipment.
• Only use the product for the permitted uses specifi ed. Do not use the product for purposes other than those specifi ed.
• Do not tamper with or modify the product.
• Only use original spare parts.
• Cordon off the working area to prevent the access of unauthorised persons.
• Ensure that the working area is clear of obstacles and the fl oor is not slippery.
• All equipment used must be in good working condition.
• Ensure that the work area is well lit. Ensure that the work area is free from obstructions and health and safety hazards.
• Do not allow unauthorised persons into the work area.
• Ensure that someone is present in the work area at all times. Do not leave the area and equipment unattended.
1.1
PRODUCT DESCRIPTION
RSK24 - microprocessor unit for driving one or two motors with total maximum power rating of 100 Watt.
This unit is available in two versions: for the Aprimatic SKIPPER operator and for the Aprimatic RAIDER operator.
The difference between the two versions is that the default settings for some of the operating parameters are different
(see section 4).
On SKIPPER operators the unit is fi tted inside the operator box. - On RAIDER operators the unit is housed in its own sealed
container (Fig.1).
Both versions can be supplied with a radio receiver already plugged into the board.
Operator functions can be set to match user needs. This is done by modifying the operating parameters as described in
section 4.1 "Advanced Programming".
1.2
PERMITTED USES AND APPLICATIONS
The RSK24 electronic unit has been designed for the
automatic control of Aprimatic SKIPPER and RAIDER
operators for single- and double-wing gates.
You should note the operating restrictions specifi ed in the
installation manual supplied with your operator.
Information
•
Only use the product for the permitted uses
specifi ed. Do not use the product for purposes other
than those specifi ed.
•
Do not tamper with or modify the product.
•
The product must only be installed using APRIMATIC
material.
Aprimatic S.p.A. declines all liability for damages caused
by failure to follow these instructions
1.3
TECHNICAL DATA (Tab. 1)
Technical specifi cations
Power supply voltage for accessories
Frequency
Power consumption (no load)
Power consumption (Max.)
Operating temperature
Storage temperature
Relative humidity
Protection class
F1 - primary transformer protection fuse
F2 - external accessories protection fuse (24 V DC)
F3- electronic circuit protection fuse
Safety precautions/
RSK24 unit
-
L
N
24 V AC
BATT
RAIDER
230 V AC (+6 % ; -10 %)
50/60 Hz
3 W
100 W
(with 2 motors and accessories connected up and operating)
-20°C +55°C
-20°C +85°C
<90% non condensing
IP44 (only with IP44 housing)
3.15 A fast blow
500 mA fast blow
5 A fast blow
- 15 -
Product description
+
M1 M2 M3 M4
1
2
3
4
5
6
SKIPPER
Fig. 1
7
8
9
10 11 12
Tab. 1
Publicidad
