Instruction Manual - Gardigo 70021 Manual De Instrucciones

BATTERY MOLE CHASER BASIC

Instruction manual

Art.-No. 70021
Dear client,
thank you for choosing one of our quality products. In the
following, we will explain the functions and operation of our
product. Please take the time to read through the instruc-
tions carefully. Please take some time to read through the
instructions carefully. Please note all the included safety and
operating instructions. Keep this manual safe and ensure
that you include it when passing on the product on to a third
party. If you have any questions or suggestions about this
product, please contact your supplier or our service team.
We would appreciate it if you would recommend us to others,
and we hope you enjoy using this unit.
1. General
Repels unwanted Moles and Voles from your ground. Insert
the item in the ground of your garden, the Mole chaser send
waves in the ground which disturb the moles and they will
go away. The waves are send out every 40 seconds from
400 – 1000 Hz frequency range. The Mole Chaser Basic is wor-
king with batteries and ideal for winter and dark season. The
batteries can be changed without removing the unit from the
soil. For successful effect, pls read our instruction in manual
concerning positioning and application. Pls insert the item
before the first freezing.
2. Technical Data
• S taffeffective area: 700 m²
• Material: ABS
• Frequency: 400 – 1000 Hz
• Power supplied: 3 x D batteries (1,5 V)
• Interval switching: 2 sec. ON/40 sec. OFF
• Size: 7 cm x 5 cm x 29,5 cm
3. Package contents
• 1 x ground spike
• 1 x Instruction manual
4. Safety and warning notes
• Take the parts carefully out of packaging.
• M ake sure before using the battery mole repller that has
not been damaged during transportation. Operation is for-
bidden if there is damage.
• K eep packaging materials away from children and pets.
The packaging contains small parts which can be swallo-
wed by children.
• T he entire product may neither be changed nor converted.
Changes mind to the product lead to invalidation of the
guarantee.
5. Assembly
1. Take the parts carefully out of packaging.
2. Take the battery slot out.
3. Put the batteries into the spike.
4. Push the ground spike into the ground by hand.
Please do not use hammer or similar too to do
this. The ground spike cannot be rammed into
rock. There is danger of injury and the spike
could become damaged.
5. Push the ground spike into the ground up to
a maximum of 25 cm. The end of the tube
should be approx 2 cm above the surface of the
ground.
6. Care and servicing
• T he product must be cleaned free form dirt if necessary.
Use a dry or slightly damp cloth for cleaning.
• Never use chemicals or abrasives for cleaning.
• R emove the batteries and store them in a dry, protected
storage space if the products it not used for longer of time.
Status: 01/17
5