Publicidad
Idiomas disponibles
Idiomas disponibles
RGB colors / set LED and strobe effect
With the function "SRGB", you can adjust the RGB colour intensity and the strobe effect between
values 0 and 255. The values of the strobe-channel are the same as the decimal values given in the
following strobe-channel.
Internal Program
With the function "PR. 1-8" you can run the internal programs. you can set the program speed under
„SPED" and the strobe-effect under „FREN" to a value between 0 (1) and 255.
SOND
• Press [UP] or [DN] to enter the main menu "SOND"
• Press [ENTER] and select the desired sub menu by pressing [UP] or [DN].
• Press [ENTER] for selecting the desired sub menu.
Sound-controlled Program Run
The selection "ALON" means Stand Alone-mode and "MAST " that the device is defined as master.
• Select "CTRL"pressing [UP] or [DN].
• Press [ENTER] to confirm.
• Select "MAST" or "ALON" by pressing [UP] or [DN].
• Press [ENTER] to confirm.
• Press [ESC] in order to return to the main menu.
Microphone sensitivity
With the function "MIC", you can select the desired microphone sensitivity between 0 % and 99 %.
OTHE
• Press [UP] or [DN] to enter the main menu "OTHE".
• Press [ENTER] and select the desired sub menu by pressing [UP] or [DN].
• Press [ENTER] for selecting the desired sub menu.
Restore factory settings
With the function "LODA" you can restore the factory settings of the device. All settings will be set
back to the default values (shaded). Any edited scenes will be lost.
Software version
With this function you can display the software version of the device.
• Select "VER" by pressing [UP] or [DN].
• Press the enter-button, the display shows "V-X.X", "X.X" stands for the version number, e.g. "V-
1.0", "V-2.6".
• Press the Esc-button in order to return to the main menu.
DMX-controlled operation
You can control the devices individually via your DMX-controller. Every DMX-channel has a different
occupation with different features.
The FUTURELIGHT LB-12 TCL LED-BAR has 3 DMX-modes.
Addressing
Depending on the DMX-mode, each device of the FUTURELIGHT LB-12 TCL LED-BAR occupies 15, 12 or 6
DMX-channels. If you select program "R ,G, B control per group" for example, the device occupies 6 DMX-
channels. The Control Board allows you to assign the DMX starting address, which is defined as the first
channel from which the LB-12 TCL LED-BAR will respond to the controller.
If you set, for example, the address to channel 7, the LB-12 TCL LED-BAR will use the channel 7 to 12 for
control.
Please make sure that you don't have any overlapping channels in order to control each FUTURELIGHT LB-
12 TCL LED-BAR correctly and independently from any other fixture on the DMX data link.
30/63
00032438.DOC, Version 1.0
Publicidad
