Publicidad
drastic decrease in the volume of both the transformer and the levelling reactance so
- Argon bottle adapter.
The most important data regarding use and performance of the welding machine are
S
machines.
technical assistance, requesting spare parts, discovering product origin).
- U
maximum no-load voltage (open welding circuit).
- I /U
current and corresponding normalised voltage that the welding machine
until its temperature returns within the allowed limits).
shows the range of adjustment for the welding current (minimum
maximum) at the corresponding arc voltage.
- U
- I
- I
10-
aware of its possibilities.
according to the required welding current/voltage.
the arc welding procedure and at the same time to form galvanic separation of the
current / voltage.
3- Coupler for connecting the gas hose (bottle - welding machine pressure reducer)
(if present).
4- Fuse (if present).
5- Connector for water cooling unit (if present).
the torch push-button (if present).
adjusts another parameter that depends on the welding mode being used.
3- Connector for connecting the torch push-button.
5- Control panel.
1
button (6a) down during the switching on and initial test phase (phase that
follows the switching off of the main switch).
welding.
with the previous setting of 6a, 6b, 6c, 6d.
[sec]
- 6 -
2
1
)
2
,
1
2
Publicidad
