Descargar Imprimir esta página

Diamond NG-UA-005EW Instrucciones Para Uso Y Mantenimiento página 93

Ocultar thumbs Ver también para NG-UA-005EW:

Publicidad

NL
All manuals and user guides at all-guides.com
1.9 AANSLUITEN OP HET GASNET
Verbind de oven met de aansluiting (A) met behulp van
zichtbaar geplaatste onbuigzame metalen buizen van gegal-
vaniseerd staal of koper.
Gebruik nooit slangen om de oven op het gasnet aan
te sluiten.
Het apparaat moet worden aangesloten op een aan-uit
hoofdkraan die gemakkelijk te bedienen is.
Gebruik een driedelig metalen verbindingsstuk om de buis
en de oven te verbinden, zodat deze gemakkelijk kan wor-
den verwijderd.
Zorg voor een perfecte afdichting van de schroefdraden met
door de fabrikanten vermelde materialen, omdat deze speci-
aal geschikt zijn voor LPG.
Het apparaat moet worden geleverd met het geschikte gastype (raadpleeg de tabel "technische gegevens" en
etiket). Het apparaat is ingesteld voor gebruik met het gastype dat op het "typeplaatje" vermeld is.
2.0 CONTROLEREN OP GASLEKKEN
Controleer na het installeren van de oven of er geen gas in de kamer lekt. Borstel hiervoor de verbindingen en
de bevestigingen met zeepwater. De luchtbellen geven aan dat er een gaslek is.
2.1 OMZETTEN NAAR EEN ANDERE GASSOORT
Tables 18A, B and C specifies:
- which gas can be used for the oven.
- the nozzles and settings for each gas that can be used.
- the number indicated in table TAB1 is also stamped on the body of nozzles.
To convert the oven to the local gas type, follow the in-
structions given in table 18A and carry out the steps below:
- Replace the main burner nozzle (UM).
- Affix the adhesive tab indicating the new type of gas
used.
- The nozzles and adhesive tabs are supplied with the oven.
After adaptation to another type of gas or maintenance,
check the oven operation.
2.1A CHECKING THE GAS SUPPLY PRESSURE
To measure the gas supply pressure use a manometer with a minimum
definition of 0,1 mbar.
Remove the screw from on pressure test point M and connect the mano-
meter to the test point.
Make the measurement with the oven heating.
IMPORTANT! IF THE GAS SUPPLY PRESSURE IS NOT WITHIN THE
LIMITS (MIN. - MAX) INDICATED IN TABLE 18C, STOP OPERA-
TION OF THE OVEN AND CONTACT THE GAS COMPANY.
65

Publicidad

loading