Silvercrest SSH 600 A1 Instrucciones De Uso página 85

Operation
Requirements for the operating location
For safe and trouble-free operation of the appliance, the operating
location must fulfil the following requirements:
–
The appliance may only be operat-
ed in an upright position and fully
assembled. The spacers 0 must
touch the wall (see fig. 1).
–
The mains socket must be easily
accessible so that the appliance
can be quickly disconnected in an
emergency.
–
The minimum distances between the
appliance and other objects of 20
cm to the side, 20 cm to the top,
10 cm to the bottom and 1 m to the
front must be observed (see fig. 2).
–
Ensure that the air can always enter
and escape freely.
Otherwise, there could be a heat
build-up in the appliance.
DANGER! Risk of fire due to con-
tact with fabrics!
Do not allow flammable materials
(e.g. textiles) to come into contact
with the appliance.
Do not cover the appliance.
│ GB │ MT
■ 82
Fig. 1
Fig. 2
SSH 600 B2