Silvercrest SSH 600 A1 Instrucciones De Uso página 92

Troubleshooting
This section contains important information on fault identification and
rectification.
WARNING! Repairs to electrical appliances should only be
carried out by specialists trained by the manufacturer. Improper
repairs can cause considerable risks to users and damage to the
appliance.
Fault causes and remedies
The following table will help you to identify and rectify minor
malfunctions:
Fault
The appliance
will not switch
on.
The appliance
switches itself to
standby mode.
Note: If the above-mentioned solutions do not resolve the prob-
lem, please contact Customer Service (see section Service).
SSH 600 B2
Possible cause
The plug is not con-
nected.
The mains socket is not
supplying any power.
The tilt cut-out has
been activated.
The set heating time
has expired.
Remedy
Insert the plug com-
pletely into the mains
power socket.
Check the house mains
fuse.
Plug the appliance up-
right into the mains sock-
et with the display 3 at
the top.
Increase the heating
time if you wish.
GB │ MT │
89
■