Precautions Against Kickout; Maintain Control - Efco DS 3500 S Manual De Instrucciones

brush cutter, use the appropriate blade
guard (Fig. 3). When transporting in a
vehicle, keep blade covered with the
guard. Properly secure your brush cutter to
prevent turnover, fuel
spillage and damage.
• Do not operate a brush cutter with
one hand! Serious injury to the operator,
helpers, bystanders, or any combination of
these persons may result from one-handed
operation. A brush cutter is intended for
two-handed use.
• Before you start the engine, make sure the
cutting attachment is not contacting any
object.
• Shut off the engine before setting down
the brush cutter. Do not leave the engine
running unattended.
• Only use the brush cutter in well-ventilated
places, do not
in explosive or fl ammable atmospheres or
in closed environments. Beware of carbon
monoxide poisoning.
• Do not operate brush cutter from a ladder
or in a tree. Always cut from a fi rm-footed
and safe position.
WARNING: Take great care when
working on sloping ground.
• Do not cut near electric cables.
• Keep the handles dry, clean, and free of oil
or fuel mixture.
• Never cut with the brush cutter above
shoulder height.
• Never use the brush cutter without blade
guard or the head guard.
• Do not start the engine with the arm not
mounted.

Precautions Against Kickout

WARNING: Avoid kickout which
can result
Kickout is
SAFETY RULES
operate the brush cutter
in serious injury.
the sideward,
sudden forward motion of the
machine
blade contacts any object such
as a log or stone, or when the
wood closes in and pinches the
saw blade in the cut. Contacting
a foreign object can also result in
loss of brush cutter control.
Reduce the Risk of Kickout
WARNING:
kickout can happen. With a basic
understanding of kickout, you can
reduce the element of surprise
which contributes to accidents.
• Never let the moving blade contact any
object.
• Keep the
obstructions such as other trees, branches,
rocks, fences, stumps, etc. Eliminate or
avoid any obstruction that your blade could
hit while you are cutting.
• Keep your
manufacturer's
maintenance instructions.
• Begin and continue cutting at full speed.
If the blade is moving at a slower speed,
there is greater chance of kickout
occurring.

Maintain Control

• Keep a good, fi rm grip on the brush cutter
with both hands when the engine is running
and don't let go (Fig. 2). A fi rm grip will help
you reduce kickout and maintain control of
the brush cutter.
Keep the fi ngers encircling the handle.
• Stand with your weight evenly balanced on
both feet.
• Do not overreach. You could be drawn or
thrown off balance and lose control of the
or
brush cutter.
occurring when
Recognize
working area free
blade sharp.
blade sharpening
the
en
that
from
Follow
and
9