ZTE BLADE C2 PLUS Manual Del Usuario página 40

2. Connect the charger to a standard AC wall outlet.
3. Disconnect the charger when the battery is fully
charged.
WARNING!
and cables. The use of unapproved accessories
could damage your phone or cause the battery to
explode.
NOTE:
• If excessive discharge of the battery, the charging
icon will display delay.
• If the battery is extremely low, you may be
unable to power on the phone even when it is be
ing charged. In this case, try again after charging
the phone for at least 10 minutes. Contact custom
er service if you still cannot power on the phone
after prolonged charging.
Use only ZTE-approved chargers