SHERCO 500 SEF RACING 2024 Manual Del Propietário página 125

WHEELS, TIRES
REMOVING THE FRONT WHEEL
REINSTALLING THE FRONT WHEEL
1
1 2
3
2 3
Place the motorcycle on a suitable stand.
Remove the two screws
1
Loosen the two screws
3
Pull the axle through the right side.
Remove the wheel from the fork.
WARNING
Do not operate the front brake lever when the front wheel is
removed.
Check if the brake disc is not dirty or contaminated with
oil or grease. If it is, clean the disc with brake cleaner.
Brake cleaner
Install the spacer on the left side of the wheel hub.
1
Install the front wheel in the fork and install the axle
(grease the axle prior to installation).
Tighten the screws .
2
Fork screws
Install and tighten the axle nut
Front wheel axle nut
Tighten the screws on the right side of the bike.
Fork leg screws
Loosen screws .
2
Actuate the front brake lever several times until the
brake pads touch the disc.
Remove the motorbike from the stand and push the
fork several times.
Tighten the 2 screws .
2
and the nut .
2
.
Motul ® P2 Brake Clean
M8 15Nm
.
3
M20 60Nm
M8 15Nm
125