Improper Use; Safety Signs; Product Identification Label - Stiga LT 40 Li Manual De Instrucciones

3.1.2 Improper use

Any other use that does not comply with the
above, can be dangerous and cause damage to
people and/or property. Examples of improper
use may include, but are not limited to:
– using the machine for sweeping, tilting
the cutting line head. The power of
the motor could throw objects and
small stones 15 metres or more,
causing damage or injury to people;
– trimming hedges or other jobs in which the
cutting means is not used at ground level;
– cutting and chopping trees,
bushes and flowers;
– using the machine for cutting
non-plant material;
– using the machine with the cutting
means above the operator's belt level;
– using the machine in public
gardens, parks, sports centres, on
roadways, fields and woods;
– using cutting means other than those
listed in the "Technical Data" table.
Serious injury and wound hazard.
– using of the machine by more
than one person.
IMPORTANT Improper use of the
machine will void the warranty and relieves
the Manufacturer of any liability, placing all
responsibility for damage or injury, to him/
herself or third parties, on the user.
3.1.3 Type of users
This machine is intended for use by
consumers, i.e. non-professional operators.
It is intended for "hobby-related activities".

3.2 SAFETY SIGNS

The machine has various symbols on
it (fig. 2). Their function is to remind
the operator of the correct conduct for
use, with due care and caution.
Meanings of the symbols:
WARNING! DANGER!
Failure to use this machine
correctly can be hazardous
for oneself and others
IMPORTANT Any damaged or illegible
decals must be replaced. Order replacement
decals from an Authorised Service Centre.

3.3 PRODUCT IDENTIFICATION LABEL

The product identification label
provides the following data (fig. 1 ):
1. Sound power level
2. Conformity marking
3. Year of manufacture
4. Type of machine
5. Serial number
6. Name and address of Manufacturer
7. Article code
Write the identification data of the
machine in the specific space on the
label on the back of the cover page.
EN - 7
WARNING! Read the
owner's manual before
using the machine.
Anyone operating the machine
under normal conditions for
continuous daily use may
be exposed to a noise level
equal to or exceeding 85
dB (A). Use ear protection
devices and goggles.
PROJECTION HAZARD!
Be careful of flying debris
projected by the cutting
means, that can cause
serious injuries to persons
or damage to things.
PROJECTION HAZARD!
People or pets must be
kept at least 15m away
when using the machine!
Do not leave the
machine in the rain (or
in damp conditions).