Publicidad
Idiomas disponibles
Idiomas disponibles
1. Depending on which screw you are
removing, lay the hedge trimmer on
its back or hold it on its side so that
the sealing screw to be removed is
facing upwards (Fig. 19 & 20).
2. Use the dual-head wrench provided
to loosen and remove the sealing
screw.
3. Use a grease gun (not included) to
inject some grease into the screw
hole; do not exceed 3/4 capacity.
4. Tighten the sealing screw after
injection.
TRANSPORTING AND STORING
◾
Remove the battery pack from the
tool.
◾
Clean the tool thoroughly before
storing it.
◾
Put on the blade guard onto the cutting blade before storing or transporting. Use
caution to avoid the sharp teeth of the blades. For saving space, fold the hedge
trimmer to its storage position (see Fig. 2).
◾
If the hedge trimmer is removed from the power head and stored separately, fit
the end cap onto the hedge trimmer shaft to avoid getting dirt into the coupler.
◾
Store the unit in a dry, well-ventilated area, locked-up or up high, out of the reach
of children. Do not store the unit on or adjacent to fertilizers, gasoline, or other
chemicals.
HEDGE TRIMMER ATTACHMENT — HTA2000/HTA2000-FC/HTA2020/HTA2020-FC
19
Sealing Screw
20
Sealing Screw
Gear Case
Sealing Screw
29
Publicidad
