Publicidad
Idiomas disponibles
Idiomas disponibles
EN
MONITORING
Stand by mode
Option in the settings menu: operation mode/operation status input 1, CAM1, input 2,
CAM2 (open/closed)
Image
DOOR 1
Each monitoring time is 60s
Press the talk button
Call outdoor
If you are using only one outdoor camera in monitoring mode, you can also end the monitoring mode
by pressing the monitoring button again (CAM1; DOOR2; CAM2 must be close in the menu option)
If you use two indoor units, you can also simultaneously in other indoor unit starts monitoring
mode, the same images are displayed on the screen of the different indoor unit.
If during a call with the outdoor unit in monitoring mode a guest presses the call button on either
outdoor unit, the monitoring mode will be deactivated, and the visitor's image will appear on the
monitor.
With the SD card, in video recording mode, press the settings button the first time to start recording a
video, pressing the settings button again will stop recording. If "snapshot" mode is active, pressing the
settings button takes a picture
DOOR2
Image
Image
CAM1
DOOR 2
Press the unlock button on
the indoor unit, the electric
lock will be opened
to close LCD
Press the hang up
button to end the
call
34
Publicidad
