Publicidad
Idiomas disponibles
Idiomas disponibles
[CAM1s sensor type ]: The CAM1 channel corresponds to an I/O status (see status expansions
below), which means that when an ALARM is triggered, the corresponding channel will be
activated to initiate alarm recording or snapshot capture.
[CAM2 sensor type]: The CAM2 channel corresponds to an I/O status (see status expansions
below), which means that when an ALARM is triggered, the corresponding channel will be
activated to initiate alarm recording or snapshot capture.
I/O status type
No: 'Normally open' means that in its normal state, the sensor is kept under a constant low
voltage. If the output voltage increases, the alarm is triggered.
NC: "Normally closed", the normal state of the sensor is under constant high voltage.
If the output voltage increases, the alarm is triggered.
OFF: Set I/O to closed if external alarm sensors are not in use.
Ensable or disabloe Cam1 Preview
[CAM1]:
Ensable or disabloe Cam2 Preview
[CAM2]:
The alarm activation time of camera 1 if camera 1 was triggered by an
[CAM1 Ringtone
activity detected by the sensor; values can be set from 0 to 20
time ]:
seconds.
The alarm activation time of camera 2 if camera 2 was triggered by an activity
[CAM2 ringtone
detected by the sensor; values can be set from 0 to 20 seconds.
time]:
Back to previous menu
[Return]:
7. MULTIMEDIA
In the main menu, move the cursor to media, press the settings button to access the media
menu. The options included are: music, video, photos, files (for models with SD card)
7.1 MUSIC (for models with SD card)
In the media menu, press "+" or "-" to move the cursor to the "music" option, press the settings
button in the playlist, automatically play the first music track in the music list, pressing + moves the
cursor down, pressing - moves the cursor up, continuing to press + moves the cursor forward,
continuing to press the hang-up button moves the cursor back, press the settings button once to
pause, select a track with the settings button and confirm playback. During music playback, pressing
a transfer button switches to a playback mode. Playback modes include: single playback, random
playback, sequential playback, single cycle and list cycle. Single playback: after track playback
automatically stops; random playback: random playback of all tracks, does not stop. Loop playback:
play all tracks from top to bottom, the player stops after the last track; single loop: repeat the same
track again and again, do not stop; loop: repeat the playback order of all tracks, play the last track
again from first to last to circulate the playback order.
42
Publicidad
