Publicidad
Idiomas disponibles
Idiomas disponibles
Enables or disables door 2 preview
[Door 2 status]:
[door 1 unlock time]:
[door 2 unlock time]:
[Registration
The options included: video and snapshot. Video means that when the guest
presses the call button, the indoor monitor with the SD card will
mode]:
automatically start the video until the end of the call or the guest interrupts.
Snapshot means that when the guest presses the call button of the indoor
unit, the indoor monitor will automatically take the snapshot of the outdoor
camera. Pressing the settings button continues to take the picture.
[Rilevazione
Options included "Door1"; "Door2"; "CAM1" ; "CAM2" and "disable".
movimento]:
The sensitivity of mobile detection is divided into three grades: low, medium
[Sesitivity]:
and high. Low is difficult to trigger, medium is relatively easy to trigger, and
high is very easy to trigger.
[Duration]:
Indicates the duration of the motion detection time. Can range from 1 to 5
minutes
[preview switch]: Indicates whether the external image is played back on the internal
monitor when motion detection is enabled. If preview is enabled, the image will be played
back on the internal monitor, if it is disabled, the image will not be played back, but
background recording continues
messages ON/OFF
[Message]:
[Return]:
exit the current menu.
6. SETTING ALARM PARAMETERS
In the main menu, move the cursor to 'alarm' then press the settings button
to access the alarm menu.
[Alarm registration]: Options include 'Video' and 'Snapshot'. "Video" indicates that when an
alarm is triggered, the corresponding channel will be activated to start recording. "Snapshot"
indicates that when an alarm is triggered, the corresponding channel will be activated to
capture an image of the current video as a photo.
From 2 to 10s.
From 2 to 10 s.
41
Publicidad
