Descargar Imprimir esta página

Taurus CIGE5FIXMF Instrucciones De Uso página 54

Publicidad

Downloaded by: pd-oliana on 07-03-2023 10:49 CET
INSTALLATION OF YOUR OVEN
Check if the electrical installation is proper to bring the appliance in operating condition. If electricity in-
stallation is not suitable, call an electrician and plumber to arrange the utilities as necessary. Manufacturer
shall not be held responsible for damages caused by operations performed by unauthorized persons.
WARNING: It is customer's responsibility to prepare the location the product shall be placed on and also to
have the electrical installation prepared.
WARNING: The rules in local standards about electrical installations shall be followed during product instal-
lation.
WARNING: Check for any damage on the appliance before installing it. Do not have the product installed if it
is damaged. Damaged products cause a risk for your safety.
Right Place for Installation and Important Warnings
Appliance feet should not stay on soft surfaces such as carpets. The kitchen floor shall be durable to carry
the unit weight and any other kitchenware that may be used on the oven.
The appliance is suitable for use on both side walls, without any support, or without being installed in a cabi-
net. If a hood or aspirator will be installed above the cooker, follow the instructions of the manufacturer for
height of mounting. (min. 650 mm)
6,5 mm min.
6,5 mm min.
WARNING: The kitchen furniture near the appliance must be heat resistant.
WARNING: Do not use the door and/or handle to carry or move the appliance.
WARNING: Do not install the appliance beside refrigerators or coolers. Heat radiated by the appliance increas-
es the energy consumption of cooling devices.
INSTALLATION OF THE OVEN FEET
In order to install the oven feet;
1. Foot attachment lath is installed on the oven from the bottom of the oven as shown in (figure 10).Nuts are
centered on these lathes in order to screw feet. Complete the feet installation process by screwing the feet
to the nuts (figure 11).
2. You can balance your oven by turning the screwed feet according to the surface type you are using.
3. If your oven has plastic food as in (figure 12) you can adjust your ovens height from these feet as turned
clockwise or anticlockwise.

Publicidad

loading