Uline H-10371 Instrucciones De Montaje página 3

3. Attach four desktop brackets (A) to leg frames
(3 and 4) using two M6 x 20 mm bolts (C) per
bracket. Tighten using Allen wrench. (See Figure 3)
Figure 3
3
NOTE: Determine whether desk will be set up
for right-handed or left-handed configuration.
Assembly of a right-handed storage L-desk is
shown in the following figures. For left-handed
configuration, the short leg frame will be
placed on the opposite side of desktop.
4. With second person, place desktop (1) upside
down with holes facing up. Turn assembled desk
frame upside down. Use four M6 x 15 mm bolts (D)
to secure each desktop bracket (A) to desktop (1).
Tighten using Phillips screwdriver. (See Figure 4)
Figure 4
D
PAGE 3 OF 23
ASSEMBLY CONTINUED
5
C
A
A
1
5. Align U-brackets (B) with holes in desktop and use
two M6 x 15 mm bolts (D) to secure each bracket.
Tighten using Phillips screwdriver. (See Figure 5)
Figure 5
4
D
6. Align L-brackets (G) and L-bracket covers (H) with
holes in modesty panel (2). Use two M6 x 15 mm
bolts (D) to secure each bracket and cover set.
Tighten using Phillips screwdriver. (See Figure 6)
Figure 6
B
2
H
G
D
1122 IH-10371