EUFY Robovac Manual Del Usuario página 16

English
Use Your RoboVac with Amazon Alexa / the Google
Assistant
Currently this feature only supports English, German, French, and Spanish. You
could check regularly if more languages are supported at
https:/ /www.eufylife.com/support/.
Amazon Alexa and the Google Assistant are smart voice assistants that enable you to
control RoboVac with your voice.
Before you start, make sure that:
• RoboVac is attached to the Charging Base to ensure there is enough power.
• RoboVac is connected with the EufyHome app.
• You have an Alexa-enabled device (i.e. Amazon Echo, Echo Dot and Amazon Tap,
Echo Show, Echo Spot) or a device enabled with the Google Assistant (i.e. Google
Home, Google Home Mini). These devices are sold separately.
• The Amazon Alexa app or Google Home app is already installed on your smart
device, and you have created an account.
To control RoboVac with Amazon Alexa or the Google Assistant
1
Open the EufyHome app and tap "Smart Integrations" in the top left.
2
Follow the on-screen instructions to complete the setup.
For more information about how RoboVac works with Amazon Alexa / the
Google Assistant, visit https:/ /www.eufylife.com/support/ for details.
Cleaning and Maintenance
For optimal performance, follow the instructions below to clean and maintain RoboVac
regularly. The cleaning/replacement frequency will depend on your usage habits of
RoboVac.
Recommended cleaning/replacement frequency
RoboVac Part Cleaning Frequency Replacement Frequency
Dust Collector After each use
Once every week
Filter (Twice a week if you
have a pet)
Rolling Brush Once every month
Side Brushes Once every month
28
-
Every 2 months
Every 6-12 months
Every 3-6 months (or when visibly worn)
Every 3-6 months (or when the silicone rubber
Brush Guard Once every month
strip on the brush guard becomes visibly worn)
Sensors Once every month -
Charging Pins Once every month -
Swivel Wheel Once every month -
Clean the Dust Collector and Filter
1
Press the dust collector release button to pull the dust collector out.
2
Open and empty the dust collector.
3
Take out the filter.
English
29