EUFY Robovac Manual Del Usuario página 17

English
4
Rinse the filter thoroughly with water.
1
min
Do not use a brush, hot water, or any detergent to clean the filter.
5 Air-dry the filter completely before next use. You may change to use the other
filter if the original one is not completely dry.
24h
6
Put the filter back into the dust collector.
30
7 Push the dust collector back into the main unit.
Clean the Rolling Brush
1
Pull on the release tabs to unlock the brush guard as shown.
2
Lift the rolling brush to remove.
3
Clean the rolling brush with the provided cleaning tool or a vacuum cleaner.
4
Reinstall the rolling brush by inserting the fixed protruding end first and then clicking
into place.
5
Press down to snap the brush guard into place.
1
3
4
English
2
5
31