Publicidad
Idiomas disponibles
Idiomas disponibles
Trouble Shooting
I
Problem
Equipment
does not start
Motor stops
Result unsatis-
factory or mo-
tor labours
Blade (19)
fails to turn
Strange nois-
es, rattling or
vibrations
Level indicator
(
17) does
E
not work
Possible Cause
Power is off
Defective start lever
(
15)
A
Worn carbon brushes
Defective motor
Grass too long
Blockage by foreign object
Cut height too low
Blade (19) blunt
Blade (19) area blocked
Blade (19) assembled incor-
rectly
Blade (19) blocked by grass
Blade screw (18) loose
Blade screw (18) loose
Blade (19) damaged
Contamination
Fault Fixing
Check the socket, cable, wire
and plug and have any repairs
carried out by an electrician
Repair by customer services
Set a greater cut height. Lift the
front wheels slightly by pressing
down on the handle bar.
Remove the foreign object
Set a higher cut height
Have the blade (19) sharpened
or replace it
Clean the equipment
Install the blade (19) correctly
Remove the grass
Tighten the blade screw (18)
Tighten the blade screw (18)
Replace the blade (19)
Cleaning with a soft brush. The
level indicator must close by
itself, if it was opened.
GB
MT
35
Publicidad
