Publicidad
Idiomas disponibles
Idiomas disponibles
Follow these precautions to prevent personal injury during installation of this equipment:
• Installation must comply with all applicable equipment
fire and health codes with the authority having
jurisdiction.
• To avoid instability the installation area must be capable
of supporting the combined weight of the equipment and
product. Additionally the equipment must be level side to
side and front to back.
• Ice machines require a deflector when installed on an ice
storage bin. Prior to using a non-OEM ice storage system
with this ice machine, contact the bin manufacturer to
assure their ice deflector is compatible.
• Prior to installing a non-OEM ice storage system with
this ice machine, follow the manufacturers installation
procedures and verify the location and installation
meets the local/national mechanical codes and stability
requirements.
• Remove all removable panels before lifting and installing
and use appropriate safety equipment during installation
and servicing. Two or more people are required to lift or
move this appliance to prevent tipping and/or injury.
Warning
• Legs or casters must be installed and the legs/casters
must be screwed in completely. When casters are
installed the mass of this unit will allow it to move
uncontrolled on an inclined surface. These units must be
tethered/secured to comply with all applicable codes.
Swivel casters must be mounted on the front and rigid
casters must be mounted on the rear. Lock the front
casters after installation is complete.
• Connect to a potable water supply only.
• Do not damage the refrigeration circuit when installing,
maintaining or servicing the unit.
• This equipment contains refrigerant charge. Installation
of the line sets must be performed by a properly trained
and EPA certified refrigeration technician aware of the
dangers of dealing with refrigerant charged equipment.
Publicidad
