Publicidad
Flat belt
Courroie plate
Correa plana
Pulley
Poulie
Polea
Groove
Rainure
Ranura
Agitator
Agitateur
Agitador
Replacing the Belt
Motor shaft
Arbre du moteur
Polea del motor
Bearing holder
Porte-palier
Soporte de engrane
Groove
Rainure
Ranura
Nozzle head
Tête d'aspiration
Boquilla
Remove the bottom plate.
Lift out the agitator assembly, and
then remove the flat belt from the
motor shaft and the agitator pulley.
Place a new belt onto the motor
shaft and pulley.
Place the bearing holders into the
grooves in the nozzle head. Make
sure the new belt fits between the
guides in the nozzle head.
CAUTION
Install the belt so that it has no twists
in it and so that all components turn
smoothly.
- 42 -
Publicidad
