Dreame DreameBot D10s Manual De Usuario página 13

Connecting with Dreamehome App
This product works with the Dreamehome app, which can be used to
control your device.
Scan the QR code on the robot, or search " Dreamehome" in the app store to
download and install the app.
2. Add Device
Open the Dreamehome app, tap "
code above again to add "DreameBot D10s". Please follow the prompts to
finish the Wi-Fi connection.
My Devices
Note:
• Only 2.4GHz Wi-Fi is supported.
• Due to upgrades in the app software, the actual operations may be different
Add Device
from the statements in this manual. Please follow the instructions based on the
Scan QR code to connect.
current app version.
" in the upper right, and scan the QR
Scan QR code on the device
3. Reset Wi-Fi
Simultaneously press and hold the buttons
prompt saying, "Waiting for the network configuration." Once the Wi-Fi
indicator is blinking slowly, the Wi-Fi has been successfully reset.
Note: If your robot cannot connect to the app successfully, reset the Wi-Fi and
add the device again.
and until you hear a voice
Wi-Fi Indicator
·Blinking slowly: To be connected
·Blinking quickly: Connecting
·On: Wi-Fi connected
11
EN