Routine Maintenance
EN
Note: Wet cloths can damage sensitive elements within the robot and charging dock. Please use dry rags for cleaning.
Clean the Return-to-Dock
Sensor
Clean the Charging Contacts
18
Clean the Cliff Sensor
Robot Restarting
If the robot stops responding or cannot be turned off, press and hold down
the button
for 10 seconds to forcefully turn it off. Then press and hold the
button
for 3 seconds to turn the robot on.
Battery
The robot contains a high-performance lithium-ion battery pack. Please
ensure that it remains well-charged for daily use to maintain optimal
battery performance. If the robot is not used for an extended period of
time, turn it off and put it away. To prevent damage from over-discharging,
the robot should be recharged at least once every three months.