D-Link GO-RT-N150 Guia De Instalacion página 5

PRODUCT SET-UP
EASY SETUP WIZARD
PC
Router
Modem
PC
Modem
Router
PC
Modem
Router
D-Link
http://dlinkrouter
WELCOME TO THE D-LINK SETUP WIZARD
ADVANCED SET-UP (ACCESS VIA IP ADDRESS)
To configure GO-RT-N150 manually connect your computer to the GO-RT-N150 using the ethernet
cable provided. Then connect the power cable on the GO-RT-N150. The power light will display as
solid green. Then simply open a browser window and enter the IP address in the browser address
field:
GO-RT-N150
Step 1
Position your router close to your modem and the computer that is
already online. Place this router in an open area of your intended
work area for better wireless coverage.
Step 2
Unplug the Ethernet cable from your modem that is connected to
your computer. Plug it into the black port labled 1 on the back of
your router. The router is now connected to your computer.
Plug one end of the included Ethernet cable that came with your
router into the yellow port labeled INTERNET on the back of the
router. Plug the other end of this cable into the Ethernet port on your
modem.
Step 3
Connect the supplied power adapter into the power port on the back
of the router and then plug into a power outlet or surge protector.
Verify the power light is lit.
Step 4
From the computer you connected to the router, open a web browser
and enter "http://dlinkrouter". Then, press Enter and you will be
directed to the D-Link Setup. Wizard page and follow the on-screen
instructions to configure your D-Link router.
IP ADDRESS: http://192.168.0.1
USERNAME: admin
PASSWORD: [blank]
5