Levolor Sheer Shadings Instalación página 13

Troubleshooting
The shading raises or lowers unevenly, the fabric rubs against one
Problem
end of the headrail, or the bottom rail is uneven when fully raised.
Check that the window is square by measuring the diagonals.
Check that the installation brackets are level. Shim to level,
if necessary.
Adjust the bottom rail weight. See below.
Adjusting the Bottom Rail Weight
• Release the weight clips by inserting
a flat blade screwdriver into the weight
clip and turning clockwise.
Solution
• Move the weight in 1" increments toward the side where the
fabric is gathering.
• Secure the weight clips in position by turning them counterclockwise
after making the adjustment.
• Test and, if necessary, adjust again.
Problem The front fabric appears to cling to the back fabric.
Lightly apply a static spray for home furnishings. Follow the
manufacturer's directions.
Solution Allow the shading to dry in the fully lowered position.
If necessary, reapply the static spray each time the shading is
professionally cleaned.
Weight
Clip
Sheer Shadings Motorized Operating System
Bottom Rail
Weight
Fabric Roll
OPERATION
Weight
Clip
Gathered
Fabric
Move Weight
13