Levolor Sheer Shadings Instalación página 9

• If using spacer block(s): stack spacer block(s)
on the backside of the installation brackets.
Using #6 Hex Head Screws (not provided), which
are long enough to provide secure installation,
install screws through the installation bracket and
spacer block(s) into mounting surface.
IMPORTANT: Do not add more than 1½"
of clearance using spacer blocks.
IMPORTANT: The tops of the installation
brackets must be level with the front
edges aligned.
IMPORTANT: Use drywall anchors when
mounting into drywall.
• If using extension brackets, attach an installation
bracket to the underside of each extension bracket
using the speed nut and screw provided.
SIDE MOUNT
Prepare the Installation Brackets
Side mount the headrail when conventional mounting techniques will not work– for
example, in an arched window opening.
• Mount the extension brackets on a surface at least 1¼" wide.
• Attach the installation brackets to the extension
brackets using the provided screws and speed nuts.
IMPORTANT: When securing side mounted shadings into
a surface other than a secure wall stud, use medium to
heavy-duty wall anchors (not provided). Match anchors to
the wall thickness. Failure to mount the brackets securely
may result in injury or property damage.
NOTE: Spacer blocks cannot be used with side mount
installations.
Sheer Shadings Motorized Operating System
INSTALLATION
Spacer
Blocks
Speed Nut
Extension
Bracket
Screw
Extension
Bracket
Longer
Screw
1 / "
1
4
Minimum
Depth
9