Descargar Imprimir esta página

Levolor Sheer Shadings Instalación página 4

Ocultar thumbs Ver también para Sheer Shadings:

Publicidad

Idiomas disponibles

Idiomas disponibles

GETTING STARTED
Thank you for purchasing LEVOLOR
operation, and care, your new shadings will provide years of beauty and performance.
Please thoroughly review this instruction booklet before beginning the installation. For
information regarding operation and programming, refer to the guide included with
your remote control.
Tools and Fasteners Needed
• Flat and Phillips head screwdrivers
• Measuring tape and pencil
• Power drill,
/
" drill bit,
3
32
and ¼" hex driver
In addition, you will need fasteners designed to work with your specific mounting
surface(s).
• #6 Hex Head Screws (Provided) Two 1½" screws are provided per
installation bracket.
• Longer #6 Hex Head Screws (Not Provided) If using spacer blocks, use
#6 screws long enough for a secure attachment.
• Speed Nuts and Screws (Provided) Extension brackets come with screws
and speed nuts.
• Drywall Anchors (Not Provided) Use drywall anchors when mounting
into drywall.
#6 x 1
/
"
1
2
Hex Head Screw
(Provided)
Importance of Limit Stops on Window Shadings
Limit stops serve as the upper travel limit for the bottom rail, preventing it from
rotating around the fabric roll. Limit stops are located 6" from the ends of the
headrail or are centered on shadings less than 36" wide.
When a shading is made, the limit stops are adjusted according to the size of the
fabric roll. Occasionally, this adjustment changes during shipping or installation.
If this happens, problems can be fixed by readjusting the limit stops. See page 12
in the Troubleshooting section if shading operation is difficult or if the bottom rail
rotates around the fabric roll. Shown below are the four possible positions of limit
stops for large to small fabric rolls.
Large Fabric Roll
4
Sheer Shadings Motorized Operating System
Sheer Shadings. With proper installation,
®
Longer #6 Hex Head Screw
for Use with Spacer Blocks
(Not Provided)
• Level (laser level is recommended)
• Pliers and/or Scissors (heavy-duty)
(Two Provided with
Each Extension Bracket)
Speed Nut
and Screw
Small Fabric Roll

Publicidad

loading