GOAL ZERO YetiTank Manual De Instrucciones página 7

Yeti Tank
Expansion Battery
CHARGING YOUR YETI
TANK
When Link and Tank are properly installed and the power source is correctly
in to the 8mm port of the Yeti Link, the Input Charge Indicator light
turn blue and the Lead Acid State of Charge Indicator light
NOTE: Upon plugin, all LEDs on the Link will turn
displayed. Power source will charge
fully charged, power will
NOTE
The 8mm input port on the Yeti Link is the only way to charge both the Yeti Lithium
and Yeti Tank. Input ports on the Yeti Lithium display will only
Lithium, not the Yeti Tank.
WARNING: Tipping hazard - do not stack Tanks more than two high.
Male Chaining Cable
on, then off before correct lights are
the Yeti Lithium first. When the Yeti Lithium is
begin to store in the Yeti Tank.
Female Chaining Cable
plugged
on the Link will
will begin flashing green.
charge the Yeti
5