Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Limit the operating time
In order to increase efficiency, the cooking
surface is fitted with a operating time limiter
for each of the cooking zones. The maximum
operating time is set according to the last heat
setting selected.
If you do not change the heat setting for a long
time (see table) then the associated cooking
zone is automatically switched off and the
residual heat indicator is activated. However,
you can switch on and operate individual
cooking zones at any time in accordance with
the operating instructions.
Timer
If the appliance is equipped with a timer, it can be used to set the operating time of any
cooking zone.
To use timer with a cooking zone, it must operate with a heat setting of at least 1. If this
condition is met:
- touch the timer sensor,
- touch
or
to set the time from 0 to 99
When you touch
When both cooking zones operate:
- briefly touch
by the cooking zone for which you wish to set the timer. Continue as de-
scribed above.
When timer is counting down the letter "t" will alternate with the heat setting on the display.
When timer counts down to zero the cooking zone will turn off automatically and you will
hear a beep.
Touch
or
the letter "t" will be shown on the relevant cooking zone display.
and
simultaneously to cancel the timer.
Cooking heat
setting
1
2
3
4
5
6
7
8
9
43
Maximum op-
erating time
(hours)
10
5
5
4
3
2
2
2
1
Publicidad
