MN010023A01-AB
Chapter 3 : Operating Instructions
Chapter 3
Operating Instructions
The charger pockets accommodate either a radio with an attached Motorola Solutions-approved
battery, or a Motorola Solutions-approved battery alone. Batteries charge best at room temperature.
Procedure:
1 Plug the round end of the transformer cord into the socket (1) at the back of the charger.
2 Plug the transformer into the appropriate Alternating Current (AC) outlet.
A successful power-up sequence is indicated by a single green blink on the charger indicator.
Refer to the
Charging Indicators on page
3 Insert a Motorola Solutions-approved battery, or a radio with a Motorola Solutions-approved
battery into the charger pocket.
a Align the battery contacts with the charger contacts.
b Press the battery into the pocket, ensuring complete contact.
Once the Motorola Solutions-approved battery is properly seated into the pocket, the charger
indicator illuminates, indicating the charger has recognized the presence of the battery.
12
1
13.