Publicidad
Idiomas disponibles
Idiomas disponibles
Keep people and animals away from the work area. Children and people who do not know how to use
•
this tool should not touch it and handle it
Keep them at least 15 m from the machine during operation,
•
Use the product only under daylight or under good artificial light.
•
When using the machine, always wear full protective equipment including a helmet, protective mask, ear
•
protection, gloves, non-slip footwear and protective clothing.
Wear appropriate clothing. Do not wear loose or unbuttoned shirts. Do not wear jewellery that may
■
come in contact with moving parts. If you have long hair, tie it down and wear an appropriate safety
helmet.
Do not operate the product with damaged guards or shields in place.
•
Keep hands and feet of the appliance at all times and especially when turning the appliance off and on.
•
Do not use the tool in an area where ventilation is poor. Gas emissions can cause injury.
■
Do not work when it rains and in bad weather. Do not use the tool in damp locations.
•
Do not use the tool in the presence of flammable liquids or gases.
•
Caution: The machine releases gases when it is used. Avoid coming into contact with these gases.
•
Keep the work area clear. Before working, inspect the work area and remove any materials or objects
•
that could cause accidents.
Do not force the tool.
•
Use only the accessories supplied or recommended by the manufacturer. Use of other accessories may
•
result in an accident. Read the 'Technical Data" section of this instruction manual or ask your dealer for
advice.
Do not lean. Keep a good seating/footing and balance at all times.
•
To maintain tools and accessories carefully, keep cutting tools sharp and clean for better and safer
•
performance. Follow the instructions in this manual to lubricate and change accessories.
Always inspect the machine before and after operation. If the tool is damaged or faulty, stop using the
•
tool and bring it to an authorized service for inspection and repair.
Turn off the tool after use, when you leave it unattended, when changing these accessories and before
•
servicing.
Keep handles dry, clean and free from oil and grease.
•
Be concentrated when using the tool. Look at what you do, use good sense and do not use the tool when
•
you are tired.
Remove the blade guard before using the tool.
•
A damaged guard or other part must be properly repaired or replaced by an authorized service centre,
•
unless otherwise specified in this instruction manual.
Do not use the tool if the starter is not working (if it cannot be turned ON and OFF).
•
Place the equipment in a well-lit area on a flat, stable, dry and well-ventilated surface, away from
•
flammable materials and with plenty of space for sparking and sharpen waste.
Publicidad
